Your Galaxy S25 Ultra is ready for a moving shot, but a phone gimbal cooler needs a place on its back while the clamp, camera, and power lead all need room. You put the gimbal beside a camera cage to check which setup can hold the complete assembly without obstructing the shot or tugging on a cable.
Key Takeaways
- A gimbal or cage is suitable only when the complete assembly fits the intended shot.
- The K12’s 65 g listing cannot establish total rig weight.
- The S9’s 75 g cooling-end listing excludes the wider setup.
- Cable reach and movement need an assembled dry fit.
There is no universal winner. A gimbal may work if the cooler clears its clamp and the assembled rig can be balanced under that model’s instructions. A cage may give you a workable arrangement if its actual mounting points and openings leave room for the phone, cooler, and connections. The useful comparison is between two assembled setups—not between a bare gimbal and an empty cage.
A cooler’s listed weight is only one part of gimbal payload
The KryoZon K12 Ultra-Light Magnetic Phone Cooler is listed at 65 g and attaches through MagSafe or an adhesive magnetic ring. The KryoZon S9 Water Cooling Phone Cooler lists 75 g for its cooling end only and offers magnetic attachment plus a clip. Neither number is the weight of a phone, mount, cooler, cable, and other equipment assembled for filming.
Start with the gimbal’s instructions for the exact model you own or intend to buy. As a concrete example of why model-specific guidance matters, DJI’s Osmo Mobile 7 Series compatibility guide recommends phones 67–84 mm wide, 6.9–10 mm thick, and 170–300 g in weight. Those are recommended phone dimensions and weight, not approval for a phone with either cooler attached. Do not treat that range as a combined-accessory payload rating.
Write down the phone model, case choice, cooler, attachment method, and everything that will remain on the moving assembly. If you can weigh that assembly, record its actual weight rather than adding a cooler’s catalog figure to an assumed phone weight. As a checklist step, compare the complete assembly with your gimbal’s supported-configuration guidance. A rig can present a placement problem even when its individual components seem light enough: the cooler might overlap the clamp, cover a camera, or leave the phone in the wrong position for adjustment.
Follow the balancing procedure with the cooler installed in the position you would use to record. DJI’s Osmo Mobile Series clamp guidance, for example, tells users to place the phone in its magnetic clamp with the camera facing up. It does not approve a third-party cooler in that clamp. If the intended assembly will not balance in its planned position, try a different arrangement rather than assuming a smaller-looking attachment will fit.
A phone gimbal cooler must clear more than the clamp
Rear space is easiest to judge with a dry fit. Hold or attach the cooler at its intended position on the phone, install the phone as its mount requires, and inspect the assembly from behind and from both sides. Check the camera view, clamp contact, nearby controls, and the space the cooler occupies as the phone changes orientation. The question is not simply whether a cooler touches the back of the phone; it is whether everything can remain in its intended position throughout the shot.
Check cable behavior separately from static fit. With the rig unpowered, trace the lead from the cooler’s Type-C port to the proposed power source. Move the mounted phone through the orientations you expect to shoot, watching for tension, snagging, or a lead crossing the camera or controls. Leave a route that does not pull on the cooler or interfere with the mount. Repeat the inspection after changing from a horizontal to a vertical composition if both are part of your workflow.
The K12’s product specifications list a Type-C port and a required PD 5V/3A charger. The S9’s specifications list a Type-C port and a 1.2 m tube. A tube length tells you how much tube is supplied, not whether its route around your handles, gimbal movement, and power location will be workable. Check the route on the assembled rig rather than deciding from that number alone.
If the cooler looks clear while the phone is still but the lead pulls when you reorient it, the setup has not passed the fit check. Change the power-source position or cable route and check again. Keep the result tied to that phone, mount, and shooting orientation; another combination needs its own inspection.
A camera cage provides an alternative, not automatic clearance
A cage changes the mounting question. Instead of checking a powered gimbal’s balance, inspect where the phone sits, what occupies its rear surface, and which attachment points remain usable once the cooler is installed. Fit the exact phone and any case you will shoot with. Then check whether the cooler blocks a handle position, camera view, phone control, or connection you need during recording.
The S9 product information lists a 1/4-inch brass thread described for most streaming stands and tripods. That specification is useful when examining a possible mounting arrangement, but it does not establish that the S9 fits a particular cage. Look at the cage’s actual mounting points, their orientation, and the space around the cooler before relying on a thread description.
Do not assume a cage solves cable routing either. Put the proposed power source where it would be during a real shot—on the rig or off it—and follow the cable and, for the S9, tube through the positions you expect to use. Check that a handle, tripod attachment, or camera adjustment will not trap the route. An off-rig component still needs a practical place to sit and a route that lets you make the intended movements.
A cage is the stronger choice for your particular kit if it lets you place the phone and cooler as intended while retaining the controls, mounting points, and movement you need. A gimbal is the stronger choice if its complete assembly fits, balances under its instructions, and moves without cable tension. Neither result follows from the accessory category alone.
K12 and S9 need different installation plans

The two coolers should not be treated as interchangeable shapes with different weights. The KryoZon K12 uses semiconductor TEC cooling, weighs 65 g, attaches through MagSafe or an adhesive magnetic ring, and requires PD 5V/3A power. For a proposed K12 rig, first confirm where its magnetic attachment will sit on the phone. Then check whether that position leaves the clamp, camera, and cable path usable. Include its power lead in the assembled fit check rather than judging the mounted cooler by weight alone.
The KryoZon S9 combines water circulation with semiconductor TEC cooling. Its listed 75 g applies to the cooling end only; the product also specifies magnetic and clip attachment, a 1.2 m tube, a Type-C port, and 12V/2.5A electrical input. Plan space for the cooling head and a workable tube, pump, container, and power arrangement. A cooling-end weight cannot stand in for the weight or footprint of that full installation.
For S9 setup, the printed operating instructions direct users to submerge the pump completely in a container of room-temperature water before use and prohibit running it dry. They then direct the user to fix the cooling head to the phone or tablet and press the inline controller button to start it; a two-second long press switches it off. Account for the container’s location before deciding whether a moving shot is practical. The printed instructions recommend a compatible 12V/3A power source, while the S9 product listing specifies 12V/2.5A input.
Use the K12 comparison when you want to assess a phone-mounted magnetic cooler and its power cable. Use the S9 comparison when your intended shot can also accommodate its water-circulation setup. That is a planning distinction, not a claim that either model has passed testing on your gimbal or cage.
A dry-fit worksheet makes the final choice specific
Put both candidate assemblies on the same worksheet before deciding. Record a result only after inspecting the actual phone, mount, cooler, and proposed power arrangement. A blank field is more useful than an assumed clearance or payload figure: it tells you what still needs checking before a shoot.
| Check on your equipment | Gimbal setup | Camera cage setup |
|---|---|---|
| Phone and cooler placement | Record the installed position and any clamp or camera obstruction. | Record the installed position and any blocked handle, control, or camera view. |
| Mount requirements | Record the model’s stated payload and balancing instructions; weigh the complete moving assembly if possible. | Record the mounting points you intend to use and inspect their clearance. |
| Cable and tube route | Check reach and tension through the intended movements. | Check reach around handles, attachments, and the intended power location. |
| Final decision | Keep this option only if the assembled rig fits and follows its gimbal guidance. | Keep this option only if the assembled rig preserves the access and movement the shot requires. |
Run the check in the same order for both options: fit the phone, place the cooler, position the power equipment, route the connections, and move the assembly as the shot demands. As part of the fit check, work through the gimbal’s balancing procedure with the intended equipment installed. For a cage, verify that its useful mounting points and controls remain accessible. Note what you changed between attempts so a successful fit can be repeated.
If you are choosing a cooler while planning the rig, compare the verified mounting and power requirements before ordering. The KryoZon K12 product page lists its magnetic attachment and PD power requirement; the KryoZon S9 product page lists its cooling-end weight, attachment options, and tube length. The answer to the phone gimbal cooler versus camera cage question is the setup that passes your own complete-assembly fit check—not a winner declared from accessory names alone.
Product Specifications
| Model | Power | Noise | Weight | Cooling | Attachment | Port | Finish | Compatibility | Charger | Voltage | Mount | Modes | Material | Package | Fits | Display | Protection | Tube Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KryoZon K12 Ultra-Light Magnetic Phone Cooler | 15W (5V/3A) | 32dB | 65g | Semiconductor TEC | MagSafe or adhesive magnetic ring | Type-C | Vacuum electroplating | iPhone / Android | PD 5V-3A required | — | — | — | — | — | — | — | — | — |
| KryoZon S9 Water Cooling Phone Cooler - Fanless Liquid Cooling | 30W | Fanless cooling head; pump <30dB (manufacturer rating) | 75g (cooling end only) | Water circulation + semiconductor TEC | Magnetic + Clip | Type-C | — | — | — | 12V / 2.5A | 1/4" brass thread (most streaming stands/tripods) | 3 modes: High / Low / AI | Aluminum Alloy + ABS | Cooler, cable, clip, manual | Phones up to 92mm wide | Real-time temperature | Overheat alert + auto shutoff | 1.2m |
Frequently Asked Questions
Can I attach a phone cooler to a gimbal?
Check the exact gimbal’s clamp, supported setup, and balancing guidance with the cooler installed. For example, DJI’s Osmo Mobile 7 Series phone recommendations do not approve a K12 or S9 attachment. Inspect the complete assembly rather than using the cooler’s listed weight as proof of compatibility.
Is a camera cage always better for a phone cooler?
No. A cage still needs a suitable place for the phone and cooler, usable mounting points, and a cable route that does not obstruct the shot. Dry-fit the complete setup on the cage you intend to use; do not infer fit from the presence of accessory mounts.
Does the S9’s 75 g weight include its whole water-cooling setup?
No. The S9 product specification identifies 75 g as the weight of the cooling end only. Plan separately for the tube, pump, water container, power equipment, and their placement.
What should I check first when comparing a gimbal and a cage?
Start with cooler placement on your actual phone and inspect what it blocks. Then check the complete assembly against the gimbal’s balance guidance or the cage’s mounting layout, and trace every cable through the movements you intend to film.
References & Citations
- DJI recommends specified phone dimensions and weight for the Osmo Mobile 7 Series; the recommendations do not approve an attached cooler. (DJI Osmo Mobile 7/7P smartphone compatibility guide)
- DJI instructs users how to place a phone in the Osmo Mobile magnetic clamp. (DJI Osmo Mobile Series balancing and clamp guidelines)
- The printed S9 operating instructions require the pump to be submerged during operation and describe fitting, starting, and stopping the cooling head. (Printed S9 operating instructions)
Community & User Sources
- Techduardo reported 33 C to 43 C without a cooler and 13 C to 15 C with the S9 in the Wild Life Stress Test. (Techduardo (Influencer))
- Techduardo reported 35 C to 43 C without a cooler and 12 C to 23 C with the S9 in Wild Life Extreme while the phone w... (Techduardo (Influencer))
- Techduardo reported 35 C to 42 C without a cooler and 10 C to 14 C with the S9 in Solar Bay while the phone was charg... (Techduardo (Influencer))
- Techduardo's 30-minute 4K60 test showed internal battery/processor/graphics readings of 42/57/53 C without a cooler a... (Techduardo (Influencer))
- We're at minus 9 right now... Let's drop some water and see if it will freeze... It is just now ice. (TrueEasyTech (Influencer))
- Best loop score 7023; Lowest loop score 6271; Stability 89.3%; Battery 100% to 77%; Temperature 26 C to 41 C. (TrueEasyTech (Influencer))
- Water cooler: 7023 best, 6271 lowest, 89.3% stability. Earlier RedMagic result: 8033 best, 6477 lowest, 80.6% stability. (TrueEasyTech (Influencer))
- This is the KryoZon S9, a water-cooled phone cooler with a 30 watts cooling system. It also has magnetic and clip mou... (MLAU (Influencer))
- I tested it while playing MLBB, and as the cooler started working, I could feel my phone getting noticeably cooler du... (MLAU (Influencer))
- The source covers Animation Scale, Adaptive Battery, RAM Plus or Virtual RAM, overlay apps, and screen resolution. ML... (MLAU (Influencer))
- We have some frost stuck inside the phone. (TrueEasyTech (Influencer))
- It took only 5 seconds for water to freeze. (TrueEasyTech (Influencer))
- Cooling performance can vary depending on your phone, room temperature, and game settings, so your results may be dif... (MLAU (Influencer))