You're setting up a GameHub external display for your Android phone, with the KryoZon S9 on the phone and a capture card waiting beside the monitor. The useful distinction is that the S9’s water circulation and fanless cooling head are part of a separate cooling setup, not the route that sends the picture to the screen. Establish phone-to-monitor video first, add capture only if you need it, and then arrange the cooling hardware around the working setup. The KryoZon S9 product specifications describe the cooling system and its power connection.
Key Takeaways
- A GameHub monitor connection starts with phone video support, not the shape of its USB-C port.
- An optional capture card routes an established HDMI source through HDMI IN and HDMI OUT.
- The 1.2 m S9 tube sets the placement reach between the phone and its separate water container.
- A stepwise setup keeps video and cooling checks separate when something does not work.
GameHub external display starts with the phone’s video output
A USB-C connector on your Android phone is not, by itself, confirmation that the phone can drive an HDMI monitor. Before choosing an adapter or rearranging your desk, find your particular phone’s specifications and check for USB-C video output. Anker’s Android USB-C-to-HDMI guidance says to confirm that capability first and look for terms such as DisplayPort Alternate Mode or MHL. The adapter must also be compatible with the phone’s supported output.
Write down your exact phone model and check its specifications for USB-C video output, such as DisplayPort Alternate Mode or MHL, before choosing an adapter or dock. Anker recommends confirming that the phone supports video output through USB-C before using a USB-C-to-HDMI adapter. If the specification is unclear, ask the phone maker to confirm compatibility before buying a capture card.
A post in r/EmulationOnAndroid says that an S24 Ultra and a Red Magic 11 both output to an external display; that report concerns those phones, not your own. Check whether your monitor shows your phone’s output through the adapter you intend to use.
- Phone: identify the model and its documented USB-C video-output capability.
- Adapter or dock: check compatibility with that capability and the monitor’s intended input.
- First test: use the shortest connection path available—phone, adapter, display—before inserting recording equipment.
A working monitor feed comes before a larger GameHub desk setup
Connect the video-capable phone to its compatible USB-C adapter or dock, run the adapter’s display output to the monitor, and select the monitor input you connected. At this stage, the task is simply to see whether the display receives the phone’s output. Anker’s adapter guidance makes the phone’s video-output support the prerequisite; it does not certify a particular GameHub version, phone, or dock combination.
Check the basic picture before spending time on the game itself. Can you see the phone’s output on the external display? If so, open GameHub and check the view you actually want to use. If you see the phone interface but not the intended game view, record that as a different observation from “the monitor receives no signal.” It tells you which part of the setup to investigate next without treating every blank or unexpected screen as the same fault.
If the monitor receives nothing, return to the simple path. Confirm its selected input, inspect the connections, and revisit the phone and adapter specifications. Keep the capture card disconnected while you do this. Testing one path at a time avoids a desk full of possible causes; it does not require assuming that GameHub has a particular display menu or that one Android phone behaves like another.
Neither the general Android adapter instructions nor the community report establishes a combined GameHub, dock, capture-card, and S9 performance result. Once the phone-to-monitor connection works, you have a known source signal to route through optional recording equipment.
A pass-through capture card takes an existing HDMI source
If you want to record the phone’s display, insert a compatible pass-through capture card into the HDMI route you just established. For the pass-through devices covered by Elgato’s No Signal troubleshooting guide, the video source connects to HDMI IN and the TV or monitor connects to HDMI OUT. Follow your own capture card’s documentation for its host-computer connection and recording software; Elgato’s routing example does not specify every card’s connections.
| Setup | Video route | What to establish |
|---|---|---|
| Display only | Phone → compatible adapter or dock → monitor | The monitor receives the phone’s output. |
| Pass-through recording | Established HDMI source → capture HDMI IN → capture HDMI OUT → monitor | The monitor still receives the routed source; then check recording on the capture host. |
The distinction between HDMI IN and HDMI OUT matters because they serve different ends of the route. If you can see the phone directly on the monitor but lose the picture after inserting the card, inspect that routing and the card’s own requirements rather than changing the S9 installation. Elgato’s pass-through instructions describe the source-to-IN and monitor-to-OUT arrangement for its devices.
Leave recording preferences until the picture is present. First check the monitor feed through the card; then check whether the capture host sees the source. That order distinguishes a missing pass-through picture from a recording-software issue. It also keeps the optional part of the setup optional: if your aim is simply to play on a monitor, you do not need to add a capture card to prove the display path.
Separate power planning keeps each connection’s job clear

List the devices that need power before committing to a dock layout: the phone, any powered adapter or dock, the capture card and its host, and the S9. Check the documentation for each device rather than assuming an open USB-C socket supplies everything. The S9 product specifications give the cooler a 30 W rating, a Type-C port, and a 12 V / 2.5 A requirement. Those are S9 specifications, not a power specification for your phone or dock.
Give the phone’s video connection a clear place in your desk sketch. If you also use a controller, check where it connects on your hardware before assuming one adapter will carry video, power, and inputs together. A r/RedMagic post describes using an Xbox 360 joypad through a USB-C adapter; it does not establish how a controller and external display share ports on your phone.
Note what occupies the phone’s port, what supplies power to each accessory, which cable goes to the monitor, and which connection reaches the recording host. Then compare the list with the manuals for the exact accessories on your desk. You can make those decisions without assigning an unverified power-delivery capability to the phone, dock, or capture card.
The S9 cooling station sits outside the GameHub video chain
Place the cooling hardware after you know where the phone, monitor, and cables will sit. The KryoZon S9 Water Cooling Phone Cooler - Fanless Liquid Cooling uses water circulation with semiconductor TEC cooling. Its cooling head can attach magnetically or with a clip, and the listed tube length is 1.2 m. Those details help you plan a place for the phone and circulation hardware without making the cooler part of the HDMI route.
Choose a position that lets the head sit on the phone while the tubing reaches the water container without forcing the phone or tugging on the connections you have already arranged. Check the phone’s width against the S9’s stated fit of up to 92 mm, and decide whether magnetic attachment or the included clip suits your phone setup. The listed 75 g weight applies to the cooling end only, not the entire water-circulation arrangement (S9 product specifications).
Prepare the pump and start the cooling head
The printed S9 operating instructions say to put the pump fully under room-temperature water in a large-capacity container before use and keep it fully submerged while operating; dry operation is prohibited. Fix the cooling head to the phone, then press the inline controller button to start cooling. When finished, long-press the button for two seconds to switch it off. Follow those operating steps while arranging the container where it will not pull on the phone or its display cable.
Keep the power information for the two sources distinct. The current S9 product record lists 12 V / 2.5 A; the printed operating sheet recommends a compatible 12 V / 3 A fast-charging power source. The S9 also lists High, Low, and AI modes and a real-time temperature display. Neither the displayed value nor a selected mode is a measurement of GameHub frame rate or recording quality (S9 product specifications).
A short rehearsal separates display, recording, and cooling issues
Then attach the S9 cooling head and start cooling with the inline controller, as described in its operating instructions. If adding a component changes the setup, note which one and return to the last working arrangement.
Use your observations to name the problem precisely. “No phone output at the monitor” points back to the phone, adapter, and display path described in Anker’s Android video-output guidance. “Picture disappears when the card is inserted” calls for checking the HDMI IN-to-OUT route shown by Elgato. “The head is mounted but cooling has not started” calls for checking the pump placement and controller sequence in the S9 instructions.
The linked discussions include a preference for a frame-rate cap in handheld play and a comparison between a phone-fed screen and a laptop; these are preferences, not measured outcomes for this setup. A monitor displays the phone’s output, while the S9 is a separate cooling setup and the capture card provides an optional recording route.
You can check the S9’s official product details while deciding whether its attachment options, tube length, and power requirement suit your desk.
Product Specifications
| Model | Cooling | Power | Noise | Weight | Attachment | Port | Voltage | Mount | Modes | Material | Package | Fits | Display | Protection | Tube Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KryoZon S9 Water Cooling Phone Cooler - Fanless Liquid Cooling | Water circulation + semiconductor TEC | 30W | Fanless cooling head; pump <30dB (manufacturer rating) | 75g (cooling end only) | Magnetic + Clip | Type-C | 12V / 2.5A | 1/4" brass thread (most streaming stands/tripods) | 3 modes: High / Low / AI | Aluminum Alloy + ABS | Cooler, cable, clip, manual | Phones up to 92mm wide | Real-time temperature | Overheat alert + auto shutoff | 1.2m |
Frequently Asked Questions
Does every Android phone with USB-C support a GameHub external display?
No. Check your exact phone’s specifications for USB-C video output and choose a compatible adapter; Anker’s Android adapter guidance identifies DisplayPort Alternate Mode and MHL as terms to look for. Test the phone-to-monitor connection before adding capture equipment.
Where does an HDMI capture card go in the display connection?
For a pass-through card wired as described in Elgato’s No Signal guide, connect the working HDMI source to the card’s HDMI IN and the monitor to its HDMI OUT. Follow the documentation for your card to connect its recording host.
Does the KryoZon S9 send GameHub video to the monitor?
The S9 product specifications describe a water-circulation and semiconductor TEC phone cooler with its own Type-C power connection. Plan phone video output through a compatible adapter or dock separately from the cooling setup.
How do I start the S9 beside a capture setup?
Put the pump fully under room-temperature water in a large-capacity container, attach the cooling head to the phone, and press the inline controller button, following the printed operating instructions. Keep the pump submerged during operation. The S9 product specifications list a 1.2 m tube, so use that length when positioning the container relative to the phone.
References & Citations
- The particular Android phone must support USB-C video output; its specifications may identify DisplayPort Alternate Mode or MHL. (Anker Android USB-C video output prerequisites)
- For the Elgato pass-through capture cards described, the HDMI source connects to HDMI IN and the monitor connects to HDMI OUT. (Elgato HDMI pass-through routing in No Signal guide)
- The operating instructions direct users to submerge the pump, attach the cooling head, use the controller to start cooling, and long-press for two seconds to stop. (Printed S11/S9 operating guide: readable shared operating clauses)
- A GameHub discussion participant reported external-display output on both of their devices; another expressed a preference for capped frame rates during handheld play. (Reddit r/EmulationOnAndroid GameHub discussion)
- A participant described using an Xbox 360 joypad through a USB-C adapter; a commenter questioned the experience of phone output on a larger screen relative to laptop play. (Reddit r/RedMagic GameHub discussion)