“A higher 3DMark stress test stability percentage means my phone performed better.” In TrueEasyTech’s comparison, the result with 89.3% stability actually had lower best and lowest loop scores than an earlier result with 80.6% stability. To understand the result, read all three numbers together: the best loop, the lowest loop, and the percentage.




Key Takeaways
- Best and lowest loops provide the absolute score context for a stability percentage.
- The 89.3% example shows the relative relationship between one result’s endpoints.
- Higher stability can accompany lower absolute scores in a comparison.
- Individual loop details reveal the intermediate score pattern that endpoints leave out.
3DMark stress test results start with the best and lowest loops
Start at the result summary and find the fields labelled Best loop score and Lowest loop score. They identify the highest and lowest scores in that run. Write them down before looking at the stability percentage: they give the percentage its context.
In TrueEasyTech’s Wild Life Extreme Stress Test, the RedMagic 11 Pro / 11 Pro+ with a KryoZon S9 attached showed a best loop of 7,023 and a lowest loop of 6,271. The creator ran the 20-loop test with the cooler in High mode and its pump submerged. This was one creator-run test; the benchmark version and ambient temperature were not confirmed, and there were no same-session repeat runs.
The difference between those two scores is 752 points. That tells you how far apart the endpoints are on the score scale.
For your own result, save the summary screen and give the run a recognizable name in your notes. Record the device, the exact test name and its version if available, along with the two scores. If your result also presents a loop-by-loop graph or detailed scores, save those too: a list of individual loops answers questions that the best and lowest figures alone cannot.
3DMark stress test stability gives the endpoints a proportion
The stability figure is useful because it puts the lowest score in context with the best. In TrueEasyTech’s result, 6,271 divided by 7,023 is approximately 0.893, or 89.3%. That arithmetic matches the displayed stability for this particular test result.
Stability is not another score to add to the endpoints. Keep the absolute numbers because similar percentages can accompany very different score levels.
For this case, the calculation is a handy way to check that you have copied the right values. Check the result page and documentation for the specific test and software version you use. Record the displayed percentage rather than rounding your own calculation and treating it as the app’s official output.
Also distinguish a percentage from a percentage-point difference. If you subtract one displayed stability percentage from another, the result is a difference in percentage points. That describes the separation between the two readings, not the amount by which an absolute loop score rose or fell.
Absolute scores can move in the opposite direction from stability
TrueEasyTech’s comparison frame makes the distinction clear. The S9-attached result showed 7,023 best, 6,271 lowest and 89.3% stability. An earlier RedMagic result labelled without the external water cooler showed 8,033 best, 6,477 lowest and 80.6% stability. The S9 result had the higher percentage, but both of its absolute endpoint scores were lower.
The screenshots were dated September 17 and April 6, 2026, respectively, and the creator raised a possible 3DMark update as an explanation for the score differences. They are not a same-session controlled comparison, so they do not isolate the cooler’s effect.
The difference in displayed stability is 8.7 percentage points. Compare the best and lowest loop scores separately, and check gaming performance in the game itself.
When comparing your own results, put the entries in the same order each time: test and version, best score, lowest score, stability, then the conditions you recorded. Ask two questions: How high were the scores? and How close was the lowest to the best? A result can answer one favorably without answering the other in the same way.
The TrueEasyTech summary reports the two endpoints, with no full loop-by-loop score list. If your saved result includes individual loops, look for where the high and low scores occur and whether the intervening scores cluster together or change across the run.
A useful comparison keeps the test conditions visible

Make a small record before changing anything. The point is to preserve details that can help you interpret the next result, not to make the phone chase a particular percentage. A note or spreadsheet with one row per run is enough.
- Identify the workload. Record the phone model, the full stress test name and the 3DMark version shown on your device. Use the same test and version for a comparison you intend to interpret side by side.
- Record the starting setup. Note the case, charging state, power mode, cooler configuration if used, and whether other demanding apps are running. Write down the room conditions if you can describe or measure them.
- Save the result. Capture best loop, lowest loop and stability together. Save any displayed loop detail as well, so you can inspect more than the two extremes.
- Repeat and label. Give each run its own entry and note changes rather than overwriting the previous result. If you change the cooling setup, record which run used which setup.
- Read both dimensions. Compare the absolute endpoints first, then the displayed stability. Check the individual-loop view if you saved one.
Leave an unknown field blank rather than filling it from memory. A missing version or starting condition is easier to recognize in your notes than an invented value. If two runs were made under different conditions, keep those differences next to the numbers when you share or interpret them.
Repeated runs can help you see whether your own readings are consistent. Allow the phone to return to a comparable starting state between runs, and note what you did. Changing several settings at once makes it harder to work out which change is associated with a different result.
The S9 setup belongs in the test notes, not in the score
For a phone-cooling setup, our KryoZon S9 Water Cooling Phone Cooler - Fanless Liquid Cooling combines water circulation with semiconductor TEC cooling and has a fanless cooling head. It offers magnetic and clip attachment for phones up to 92 mm wide. Choose an attachment that holds the head securely against the phone without obstructing the camera or controls.
Before switching it on, use a large-capacity container of room-temperature water and completely submerge the pump. The printed operating instructions prohibit running the pump dry. Fix the cooling head to the phone, then press the inline controller button to start; hold that button for two seconds to switch it off.
For your notes, record the selected mode and how the head was attached. Keep the head placement and the rest of the setup consistent across runs intended for comparison. If you change position or remove a case, write that down as a setup change rather than treating the next score as a direct continuation of the previous run.
Our S9 offers High, Low and AI modes. The display is useful for monitoring the cooler, but record the measurement’s source and location separately from any temperature reported by the benchmark. Those readings should not be treated as interchangeable simply because both use degrees.
Game observations answer a different performance question
Wild Life Extreme provides a repeatable stress-test result to inspect; a game session gives you a view of the experience you actually care about. Use the benchmark to compare the recorded loop scores and use the game to observe its own behavior.
Choose a game and settings you normally use, then note what you observe during play. Useful entries include the graphics and frame-rate settings, whether the phone is charging, and any visible frame-rate information the game provides. Describe interruptions in plain language: for example, whether a slowdown appeared during a busy scene or throughout the session.
Keep a game observation tied to the device, game version and settings that produced it. If you repeat the session with a different setup, record that change.
Finish by returning to the same three fields: best loop, lowest loop and stability. The 3DMark stress test stability percentage is most informative when the absolute scores and test conditions remain beside it; your own game observations then add a separate view of sustained use.
Product Specifications
KryoZon S9 Water Cooling Phone Cooler - Fanless Liquid Cooling
- Cooling
- Water circulation + semiconductor TEC
- Power
- 30W
- Voltage
- 12V / 2.5A
- Noise
- Fanless cooling head; pump <30dB (manufacturer rating)
Frequently Asked Questions
Does a higher 3DMark stability percentage mean a higher score?
Not necessarily. In TrueEasyTech’s comparison, the higher-stability result had lower best and lowest scores.
How do I check the stability percentage against the loop scores?
For TrueEasyTech’s Wild Life Extreme result, lowest ÷ best approximately matches the displayed percentage.
Can the best and lowest loops show when performance changed?
Check the individual-loop detail, if available, to see when scores changed.
Does a stress test score predict my game’s frame rate?
Record the benchmark result, then observe your game separately, noting its device and settings.
References & Citations
- The operating instructions specify submerging the pump, using room-temperature water, attaching the head before starting, and holding the controller button for two seconds to switch off. (Printed S11/S9 operating guide)
Community & User Sources
- We're at minus 9 right now... Let's drop some water and see if it will freeze... It is just now ice. (TrueEasyTech (Influencer))
- Best loop score 7023; Lowest loop score 6271; Stability 89.3%; Battery 100% to 77%; Temperature 26 C to 41 C. (TrueEasyTech (Influencer))
- Water cooler: 7023 best, 6271 lowest, 89.3% stability. Earlier RedMagic result: 8033 best, 6477 lowest, 80.6% stability. (TrueEasyTech (Influencer))